--- /dev/null
+##
+## Authentication processes
+##
+
+# Disable LOGIN command and all other plaintext authentications unless
+# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
+# matches the local IP (ie. you're connecting from the same computer), the
+# connection is considered secure and plaintext authentication is allowed.
+disable_plaintext_auth = yes
+
+# Authentication cache size (e.g. 10M). 0 means it's disabled. Note that
+# bsdauth, PAM and vpopmail require cache_key to be set for caching to be used.
+#auth_cache_size = 0
+# Time to live for cached data. After TTL expires the cached record is no
+# longer used, *except* if the main database lookup returns internal failure.
+# We also try to handle password changes automatically: If user's previous
+# authentication was successful, but this one wasn't, the cache isn't used.
+# For now this works only with plaintext authentication.
+#auth_cache_ttl = 1 hour
+# TTL for negative hits (user not found, password mismatch).
+# 0 disables caching them completely.
+#auth_cache_negative_ttl = 1 hour
+
+# Space separated list of realms for SASL authentication mechanisms that need
+# them. You can leave it empty if you don't want to support multiple realms.
+# Many clients simply use the first one listed here, so keep the default realm
+# first.
+#auth_realms =
+
+# Default realm/domain to use if none was specified. This is used for both
+# SASL realms and appending @domain to username in plaintext logins.
+#auth_default_realm =
+
+# List of allowed characters in username. If the user-given username contains
+# a character not listed in here, the login automatically fails. This is just
+# an extra check to make sure user can't exploit any potential quote escaping
+# vulnerabilities with SQL/LDAP databases. If you want to allow all characters,
+# set this value to empty.
+#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@
+
+# Username character translations before it's looked up from databases. The
+# value contains series of from -> to characters. For example "#@/@" means
+# that '#' and '/' characters are translated to '@'.
+#auth_username_translation =
+
+# Username formatting before it's looked up from databases. You can use
+# the standard variables here, eg. %Lu would lowercase the username, %n would
+# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into
+# "-AT-". This translation is done after auth_username_translation changes.
+#auth_username_format = %Lu
+
+# If you want to allow master users to log in by specifying the master
+# username within the normal username string (ie. not using SASL mechanism's
+# support for it), you can specify the separator character here. The format
+# is then <username><separator><master username>. UW-IMAP uses "*" as the
+# separator, so that could be a good choice.
+#auth_master_user_separator =
+
+# Username to use for users logging in with ANONYMOUS SASL mechanism
+#auth_anonymous_username = anonymous
+
+# Maximum number of dovecot-auth worker processes. They're used to execute
+# blocking passdb and userdb queries (eg. MySQL and PAM). They're
+# automatically created and destroyed as needed.
+#auth_worker_max_count = 30
+
+# Host name to use in GSSAPI principal names. The default is to use the
+# name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab
+# entries.
+#auth_gssapi_hostname =
+
+# Kerberos keytab to use for the GSSAPI mechanism. Will use the system
+# default (usually /etc/krb5.keytab) if not specified. You may need to change
+# the auth service to run as root to be able to read this file.
+#auth_krb5_keytab =
+
+# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and
+# ntlm_auth helper. <doc/wiki/Authentication/Mechanisms/Winbind.txt>
+#auth_use_winbind = no
+
+# Path for Samba's ntlm_auth helper binary.
+#auth_winbind_helper_path = /usr/bin/ntlm_auth
+
+# Time to delay before replying to failed authentications.
+#auth_failure_delay = 2 secs
+
+# Require a valid SSL client certificate or the authentication fails.
+#auth_ssl_require_client_cert = no
+
+# Take the username from client's SSL certificate, using
+# X509_NAME_get_text_by_NID() which returns the subject's DN's
+# CommonName.
+#auth_ssl_username_from_cert = no
+
+# Space separated list of wanted authentication mechanisms:
+# plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey
+# gss-spnego
+# NOTE: See also disable_plaintext_auth setting.
+auth_mechanisms = plain
+
+##
+## Password and user databases
+##
+
+#
+# Password database is used to verify user's password (and nothing more).
+# You can have multiple passdbs and userdbs. This is useful if you want to
+# allow both system users (/etc/passwd) and virtual users to login without
+# duplicating the system users into virtual database.
+#
+# <doc/wiki/PasswordDatabase.txt>
+#
+# User database specifies where mails are located and what user/group IDs
+# own them. For single-UID configuration use "static" userdb.
+#
+# <doc/wiki/UserDatabase.txt>
+
+#!include auth-deny.conf.ext
+#!include auth-master.conf.ext
+
+!include auth-system.conf.ext
+#!include auth-sql.conf.ext
+#!include auth-ldap.conf.ext
+#!include auth-passwdfile.conf.ext
+#!include auth-checkpassword.conf.ext
+#!include auth-vpopmail.conf.ext
+#!include auth-static.conf.ext
--- /dev/null
+##
+## Mailbox locations and namespaces
+##
+
+# Location for users' mailboxes. The default is empty, which means that Dovecot
+# tries to find the mailboxes automatically. This won't work if the user
+# doesn't yet have any mail, so you should explicitly tell Dovecot the full
+# location.
+#
+# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
+# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
+# kept. This is called the "root mail directory", and it must be the first
+# path given in the mail_location setting.
+#
+# There are a few special variables you can use, eg.:
+#
+# %u - username
+# %n - user part in user@domain, same as %u if there's no domain
+# %d - domain part in user@domain, empty if there's no domain
+# %h - home directory
+#
+# See doc/wiki/Variables.txt for full list. Some examples:
+#
+# mail_location = maildir:~/Maildir
+# mail_location = mbox:~/mail:INBOX=/var/mail/%u
+# mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
+#
+# <doc/wiki/MailLocation.txt>
+#
+#mail_location = mbox:~/mail:INBOX=/var/mail/%u
+mail_location = maildir:~/Maildir/
+
+# If you need to set multiple mailbox locations or want to change default
+# namespace settings, you can do it by defining namespace sections.
+#
+# You can have private, shared and public namespaces. Private namespaces
+# are for user's personal mails. Shared namespaces are for accessing other
+# users' mailboxes that have been shared. Public namespaces are for shared
+# mailboxes that are managed by sysadmin. If you create any shared or public
+# namespaces you'll typically want to enable ACL plugin also, otherwise all
+# users can access all the shared mailboxes, assuming they have permissions
+# on filesystem level to do so.
+namespace inbox {
+ # Namespace type: private, shared or public
+ #type = private
+
+ # Hierarchy separator to use. You should use the same separator for all
+ # namespaces or some clients get confused. '/' is usually a good one.
+ # The default however depends on the underlying mail storage format.
+ #separator =
+
+ # Prefix required to access this namespace. This needs to be different for
+ # all namespaces. For example "Public/".
+ #prefix =
+
+ # Physical location of the mailbox. This is in same format as
+ # mail_location, which is also the default for it.
+ #location =
+
+ # There can be only one INBOX, and this setting defines which namespace
+ # has it.
+ inbox = yes
+
+ # If namespace is hidden, it's not advertised to clients via NAMESPACE
+ # extension. You'll most likely also want to set list=no. This is mostly
+ # useful when converting from another server with different namespaces which
+ # you want to deprecate but still keep working. For example you can create
+ # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/".
+ #hidden = no
+
+ # Show the mailboxes under this namespace with LIST command. This makes the
+ # namespace visible for clients that don't support NAMESPACE extension.
+ # "children" value lists child mailboxes, but hides the namespace prefix.
+ #list = yes
+
+ # Namespace handles its own subscriptions. If set to "no", the parent
+ # namespace handles them (empty prefix should always have this as "yes")
+ #subscriptions = yes
+}
+
+# Example shared namespace configuration
+#namespace {
+ #type = shared
+ #separator = /
+
+ # Mailboxes are visible under "shared/user@domain/"
+ # %%n, %%d and %%u are expanded to the destination user.
+ #prefix = shared/%%u/
+
+ # Mail location for other users' mailboxes. Note that %variables and ~/
+ # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the
+ # destination user's data.
+ #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u
+
+ # Use the default namespace for saving subscriptions.
+ #subscriptions = no
+
+ # List the shared/ namespace only if there are visible shared mailboxes.
+ #list = children
+#}
+# Should shared INBOX be visible as "shared/user" or "shared/user/INBOX"?
+#mail_shared_explicit_inbox = yes
+
+# System user and group used to access mails. If you use multiple, userdb
+# can override these by returning uid or gid fields. You can use either numbers
+# or names. <doc/wiki/UserIds.txt>
+#mail_uid =
+#mail_gid =
+
+# Group to enable temporarily for privileged operations. Currently this is
+# used only with INBOX when either its initial creation or dotlocking fails.
+# Typically this is set to "mail" to give access to /var/mail.
+#mail_privileged_group =
+
+# Grant access to these supplementary groups for mail processes. Typically
+# these are used to set up access to shared mailboxes. Note that it may be
+# dangerous to set these if users can create symlinks (e.g. if "mail" group is
+# set here, ln -s /var/mail ~/mail/var could allow a user to delete others'
+# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it).
+#mail_access_groups =
+
+# Allow full filesystem access to clients. There's no access checks other than
+# what the operating system does for the active UID/GID. It works with both
+# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/
+# or ~user/.
+#mail_full_filesystem_access = no
+
+##
+## Mail processes
+##
+
+# Don't use mmap() at all. This is required if you store indexes to shared
+# filesystems (NFS or clustered filesystem).
+#mmap_disable = no
+
+# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL
+# since version 3, so this should be safe to use nowadays by default.
+#dotlock_use_excl = yes
+
+# When to use fsync() or fdatasync() calls:
+# optimized (default): Whenever necessary to avoid losing important data
+# always: Useful with e.g. NFS when write()s are delayed
+# never: Never use it (best performance, but crashes can lose data)
+#mail_fsync = optimized
+
+# Mail storage exists in NFS. Set this to yes to make Dovecot flush NFS caches
+# whenever needed. If you're using only a single mail server this isn't needed.
+#mail_nfs_storage = no
+# Mail index files also exist in NFS. Setting this to yes requires
+# mmap_disable=yes and fsync_disable=no.
+#mail_nfs_index = no
+
+# Locking method for index files. Alternatives are fcntl, flock and dotlock.
+# Dotlocking uses some tricks which may create more disk I/O than other locking
+# methods. NFS users: flock doesn't work, remember to change mmap_disable.
+#lock_method = fcntl
+
+# Directory in which LDA/LMTP temporarily stores incoming mails >128 kB.
+#mail_temp_dir = /tmp
+
+# Valid UID range for users, defaults to 500 and above. This is mostly
+# to make sure that users can't log in as daemons or other system users.
+# Note that denying root logins is hardcoded to dovecot binary and can't
+# be done even if first_valid_uid is set to 0.
+#first_valid_uid = 500
+#last_valid_uid = 0
+
+# Valid GID range for users, defaults to non-root/wheel. Users having
+# non-valid GID as primary group ID aren't allowed to log in. If user
+# belongs to supplementary groups with non-valid GIDs, those groups are
+# not set.
+#first_valid_gid = 1
+#last_valid_gid = 0
+
+# Maximum allowed length for mail keyword name. It's only forced when trying
+# to create new keywords.
+#mail_max_keyword_length = 50
+
+# ':' separated list of directories under which chrooting is allowed for mail
+# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
+# This setting doesn't affect login_chroot, mail_chroot or auth chroot
+# settings. If this setting is empty, "/./" in home dirs are ignored.
+# WARNING: Never add directories here which local users can modify, that
+# may lead to root exploit. Usually this should be done only if you don't
+# allow shell access for users. <doc/wiki/Chrooting.txt>
+#valid_chroot_dirs =
+
+# Default chroot directory for mail processes. This can be overridden for
+# specific users in user database by giving /./ in user's home directory
+# (eg. /home/./user chroots into /home). Note that usually there is no real
+# need to do chrooting, Dovecot doesn't allow users to access files outside
+# their mail directory anyway. If your home directories are prefixed with
+# the chroot directory, append "/." to mail_chroot. <doc/wiki/Chrooting.txt>
+#mail_chroot =
+
+# UNIX socket path to master authentication server to find users.
+# This is used by imap (for shared users) and lda.
+#auth_socket_path = /var/run/dovecot/auth-userdb
+
+# Directory where to look up mail plugins.
+#mail_plugin_dir = /usr/lib/dovecot/modules
+
+# Space separated list of plugins to load for all services. Plugins specific to
+# IMAP, LDA, etc. are added to this list in their own .conf files.
+#mail_plugins =
+
+##
+## Mailbox handling optimizations
+##
+
+# The minimum number of mails in a mailbox before updates are done to cache
+# file. This allows optimizing Dovecot's behavior to do less disk writes at
+# the cost of more disk reads.
+#mail_cache_min_mail_count = 0
+
+# When IDLE command is running, mailbox is checked once in a while to see if
+# there are any new mails or other changes. This setting defines the minimum
+# time to wait between those checks. Dovecot can also use dnotify, inotify and
+# kqueue to find out immediately when changes occur.
+#mailbox_idle_check_interval = 30 secs
+
+# Save mails with CR+LF instead of plain LF. This makes sending those mails
+# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
+# But it also creates a bit more disk I/O which may just make it slower.
+# Also note that if other software reads the mboxes/maildirs, they may handle
+# the extra CRs wrong and cause problems.
+#mail_save_crlf = no
+
+# Max number of mails to keep open and prefetch to memory. This only works with
+# some mailbox formats and/or operating systems.
+#mail_prefetch_count = 0
+
+# How often to scan for stale temporary files and delete them (0 = never).
+# These should exist only after Dovecot dies in the middle of saving mails.
+#mail_temp_scan_interval = 1w
+
+##
+## Maildir-specific settings
+##
+
+# By default LIST command returns all entries in maildir beginning with a dot.
+# Enabling this option makes Dovecot return only entries which are directories.
+# This is done by stat()ing each entry, so it causes more disk I/O.
+# (For systems setting struct dirent->d_type, this check is free and it's
+# done always regardless of this setting)
+#maildir_stat_dirs = no
+
+# When copying a message, do it with hard links whenever possible. This makes
+# the performance much better, and it's unlikely to have any side effects.
+#maildir_copy_with_hardlinks = yes
+
+# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only
+# when its mtime changes unexpectedly or when we can't find the mail otherwise.
+#maildir_very_dirty_syncs = no
+
+# If enabled, Dovecot doesn't use the S=<size> in the Maildir filenames for
+# getting the mail's physical size, except when recalculating Maildir++ quota.
+# This can be useful in systems where a lot of the Maildir filenames have a
+# broken size. The performance hit for enabling this is very small.
+#maildir_broken_filename_sizes = no
+
+##
+## mbox-specific settings
+##
+
+# Which locking methods to use for locking mbox. There are four available:
+# dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe
+# solution. If you want to use /var/mail/ like directory, the users
+# will need write access to that directory.
+# dotlock_try: Same as dotlock, but if it fails because of permissions or
+# because there isn't enough disk space, just skip it.
+# fcntl : Use this if possible. Works with NFS too if lockd is used.
+# flock : May not exist in all systems. Doesn't work with NFS.
+# lockf : May not exist in all systems. Doesn't work with NFS.
+#
+# You can use multiple locking methods; if you do the order they're declared
+# in is important to avoid deadlocks if other MTAs/MUAs are using multiple
+# locking methods as well. Some operating systems don't allow using some of
+# them simultaneously.
+#mbox_read_locks = fcntl
+#mbox_write_locks = dotlock fcntl
+
+# Maximum time to wait for lock (all of them) before aborting.
+#mbox_lock_timeout = 5 mins
+
+# If dotlock exists but the mailbox isn't modified in any way, override the
+# lock file after this much time.
+#mbox_dotlock_change_timeout = 2 mins
+
+# When mbox changes unexpectedly we have to fully read it to find out what
+# changed. If the mbox is large this can take a long time. Since the change
+# is usually just a newly appended mail, it'd be faster to simply read the
+# new mails. If this setting is enabled, Dovecot does this but still safely
+# fallbacks to re-reading the whole mbox file whenever something in mbox isn't
+# how it's expected to be. The only real downside to this setting is that if
+# some other MUA changes message flags, Dovecot doesn't notice it immediately.
+# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK
+# commands.
+#mbox_dirty_syncs = yes
+
+# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE,
+# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored.
+#mbox_very_dirty_syncs = no
+
+# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK
+# commands and when closing the mailbox). This is especially useful for POP3
+# where clients often delete all mails. The downside is that our changes
+# aren't immediately visible to other MUAs.
+#mbox_lazy_writes = yes
+
+# If mbox size is smaller than this (e.g. 100k), don't write index files.
+# If an index file already exists it's still read, just not updated.
+#mbox_min_index_size = 0
+
+# Mail header selection algorithm to use for MD5 POP3 UIDLs when
+# pop3_uidl_format=%m. For backwards compatibility we use apop3d inspired
+# algorithm, but it fails if the first Received: header isn't unique in all
+# mails. An alternative algorithm is "all" that selects all headers.
+#mbox_md5 = apop3d
+
+##
+## mdbox-specific settings
+##
+
+# Maximum dbox file size until it's rotated.
+#mdbox_rotate_size = 2M
+
+# Maximum dbox file age until it's rotated. Typically in days. Day begins
+# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled.
+#mdbox_rotate_interval = 0
+
+# When creating new mdbox files, immediately preallocate their size to
+# mdbox_rotate_size. This setting currently works only in Linux with some
+# filesystems (ext4, xfs).
+#mdbox_preallocate_space = no
+
+##
+## Mail attachments
+##
+
+# sdbox and mdbox support saving mail attachments to external files, which
+# also allows single instance storage for them. Other backends don't support
+# this for now.
+
+# WARNING: This feature hasn't been tested much yet. Use at your own risk.
+
+# Directory root where to store mail attachments. Disabled, if empty.
+#mail_attachment_dir =
+
+# Attachments smaller than this aren't saved externally. It's also possible to
+# write a plugin to disable saving specific attachments externally.
+#mail_attachment_min_size = 128k
+
+# Filesystem backend to use for saving attachments:
+# posix : No SiS done by Dovecot (but this might help FS's own deduplication)
+# sis posix : SiS with immediate byte-by-byte comparison during saving
+# sis-queue posix : SiS with delayed comparison and deduplication
+#mail_attachment_fs = sis posix
+
+# Hash format to use in attachment filenames. You can add any text and
+# variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}.
+# Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits
+#mail_attachment_hash = %{sha1}
--- /dev/null
+#default_process_limit = 100
+#default_client_limit = 1000
+
+# Default VSZ (virtual memory size) limit for service processes. This is mainly
+# intended to catch and kill processes that leak memory before they eat up
+# everything.
+#default_vsz_limit = 256M
+
+# Login user is internally used by login processes. This is the most untrusted
+# user in Dovecot system. It shouldn't have access to anything at all.
+#default_login_user = dovenull
+
+# Internal user is used by unprivileged processes. It should be separate from
+# login user, so that login processes can't disturb other processes.
+#default_internal_user = dovecot
+
+service imap-login {
+ inet_listener imap {
+ #port = 143
+ }
+ inet_listener imaps {
+ #port = 993
+ #ssl = yes
+ }
+
+ # Number of connections to handle before starting a new process. Typically
+ # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
+ # is faster. <doc/wiki/LoginProcess.txt>
+ #service_count = 1
+
+ # Number of processes to always keep waiting for more connections.
+ #process_min_avail = 0
+
+ # If you set service_count=0, you probably need to grow this.
+ #vsz_limit = $default_vsz_limit
+}
+
+service pop3-login {
+ inet_listener pop3 {
+ #port = 110
+ }
+ inet_listener pop3s {
+ #port = 995
+ #ssl = yes
+ }
+}
+
+service lmtp {
+ unix_listener lmtp {
+ #mode = 0666
+ }
+
+ # Create inet listener only if you can't use the above UNIX socket
+ #inet_listener lmtp {
+ # Avoid making LMTP visible for the entire internet
+ #address =
+ #port =
+ #}
+}
+
+service imap {
+ # Most of the memory goes to mmap()ing files. You may need to increase this
+ # limit if you have huge mailboxes.
+ #vsz_limit = $default_vsz_limit
+
+ # Max. number of IMAP processes (connections)
+ #process_limit = 1024
+}
+
+service pop3 {
+ # Max. number of POP3 processes (connections)
+ #process_limit = 1024
+}
+
+service auth {
+ # auth_socket_path points to this userdb socket by default. It's typically
+ # used by dovecot-lda, doveadm, possibly imap process, etc. Users that have
+ # full permissions to this socket are able to get a list of all usernames and
+ # get the results of everyone's userdb lookups.
+ #
+ # The default 0666 mode allows anyone to connect to the socket, but the
+ # userdb lookups will succeed only if the userdb returns an "uid" field that
+ # matches the caller process's UID. Also if caller's uid or gid matches the
+ # socket's uid or gid the lookup succeeds. Anything else causes a failure.
+ #
+ # To give the caller full permissions to lookup all users, set the mode to
+ # something else than 0666 and Dovecot lets the kernel enforce the
+ # permissions (e.g. 0777 allows everyone full permissions).
+ #unix_listener auth-userdb {
+ # #mode = 0666
+ # #user =
+ # #group =
+ #}
+
+ # Postfix smtp-auth
+ unix_listener /var/spool/postfix/private/auth {
+ mode = 0666
+ }
+
+ # Auth process is run as this user.
+ #user = $default_internal_user
+}
+
+service auth-worker {
+ # Auth worker process is run as root by default, so that it can access
+ # /etc/shadow. If this isn't necessary, the user should be changed to
+ # $default_internal_user.
+ #user = root
+}
+
+service dict {
+ # If dict proxy is used, mail processes should have access to its socket.
+ # For example: mode=0660, group=vmail and global mail_access_groups=vmail
+ unix_listener dict {
+ #mode = 0600
+ #user =
+ #group =
+ }
+}
--- /dev/null
+#
+# Postfix master process configuration file. For details on the format
+# of the file, see the master(5) manual page (command: "man 5 master").
+#
+# Do not forget to execute "postfix reload" after editing this file.
+#
+# ==========================================================================
+# service type private unpriv chroot wakeup maxproc command + args
+# (yes) (yes) (yes) (never) (100)
+# ==========================================================================
+smtp inet n - - - - smtpd
+ -o content_filter=spamassassin
+587 inet n - - - - smtpd
+ -o content_filter=spamassassin
+#smtp inet n - - - 1 postscreen
+#smtpd pass - - - - - smtpd
+#dnsblog unix - - - - 0 dnsblog
+#tlsproxy unix - - - - 0 tlsproxy
+submission inet n - - - - smtpd
+ -o syslog_name=postfix/submission
+ -o smtpd_tls_security_level=encrypt
+ -o smtpd_sasl_auth_enable=yes
+ -o smtpd_sasl_type=dovecot
+ -o smtpd_sasl_path=private/auth
+ -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+ -o smtpd_recipient_restrictions=reject_non_fqdn_recipient,reject_unknown_recipient_domain,permit_sasl_authenticated,reject
+# -o syslog_name=postfix/submission
+# -o smtpd_tls_security_level=encrypt
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+# -o milter_macro_daemon_name=ORIGINATING
+#smtps inet n - - - - smtpd
+# -o syslog_name=postfix/smtps
+# -o smtpd_tls_wrappermode=yes
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+# -o milter_macro_daemon_name=ORIGINATING
+#628 inet n - - - - qmqpd
+pickup fifo n - - 60 1 pickup
+cleanup unix n - - - 0 cleanup
+qmgr fifo n - n 300 1 qmgr
+#qmgr fifo n - n 300 1 oqmgr
+tlsmgr unix - - - 1000? 1 tlsmgr
+rewrite unix - - - - - trivial-rewrite
+bounce unix - - - - 0 bounce
+defer unix - - - - 0 bounce
+trace unix - - - - 0 bounce
+verify unix - - - - 1 verify
+flush unix n - - 1000? 0 flush
+proxymap unix - - n - - proxymap
+proxywrite unix - - n - 1 proxymap
+smtp unix - - - - - smtp
+relay unix - - - - - smtp
+# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
+showq unix n - - - - showq
+error unix - - - - - error
+retry unix - - - - - error
+discard unix - - - - - discard
+local unix - n n - - local
+virtual unix - n n - - virtual
+lmtp unix - - - - - lmtp
+anvil unix - - - - 1 anvil
+scache unix - - - - 1 scache
+#
+# ====================================================================
+# Interfaces to non-Postfix software. Be sure to examine the manual
+# pages of the non-Postfix software to find out what options it wants.
+#
+# Many of the following services use the Postfix pipe(8) delivery
+# agent. See the pipe(8) man page for information about ${recipient}
+# and other message envelope options.
+# ====================================================================
+#
+# maildrop. See the Postfix MAILDROP_README file for details.
+# Also specify in main.cf: maildrop_destination_recipient_limit=1
+#
+maildrop unix - n n - - pipe
+ flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
+#
+# ====================================================================
+#
+# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
+#
+# Specify in cyrus.conf:
+# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
+#
+# Specify in main.cf one or more of the following:
+# mailbox_transport = lmtp:inet:localhost
+# virtual_transport = lmtp:inet:localhost
+#
+# ====================================================================
+#
+# Cyrus 2.1.5 (Amos Gouaux)
+# Also specify in main.cf: cyrus_destination_recipient_limit=1
+#
+#cyrus unix - n n - - pipe
+# user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
+#
+# ====================================================================
+# Old example of delivery via Cyrus.
+#
+#old-cyrus unix - n n - - pipe
+# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
+#
+# ====================================================================
+#
+# See the Postfix UUCP_README file for configuration details.
+#
+uucp unix - n n - - pipe
+ flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
+#
+# Other external delivery methods.
+#
+ifmail unix - n n - - pipe
+ flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
+bsmtp unix - n n - - pipe
+ flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
+scalemail-backend unix - n n - 2 pipe
+ flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
+mailman unix - n n - - pipe
+ flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
+ ${nexthop} ${user}
+
+spamassassin unix - n n - - pipe
+ user=debian-spamd argv=/usr/bin/spamc -f -e
+ /usr/sbin/sendmail -oi -f ${sender} ${recipient}
--- /dev/null
+SHELL="/bin/bash"
+LOGFILE="/var/log/procmail.log"
+DROPPRIVS=YES
+ORGMAIL=$HOME/Maildir/
+DELIVER="/usr/lib/dovecot/deliver"
+MAILDIR=$ORGMAIL
+DEFAULT=$ORGMAIL
+:0 w
+* ^X-Spam-Status: Yes
+$ORGMAIL/.Spam/
+:0 w
+| $DELIVER
+
--- /dev/null
+# Default location of the slapd.conf file or slapd.d cn=config directory. If
+# empty, use the compiled-in default (/etc/ldap/slapd.d with a fallback to
+# /etc/ldap/slapd.conf).
+SLAPD_CONF=
+
+# System account to run the slapd server under. If empty the server
+# will run as root.
+SLAPD_USER="openldap"
+
+# System group to run the slapd server under. If empty the server will
+# run in the primary group of its user.
+SLAPD_GROUP="openldap"
+
+# Path to the pid file of the slapd server. If not set the init.d script
+# will try to figure it out from $SLAPD_CONF (/etc/ldap/slapd.conf by
+# default)
+SLAPD_PIDFILE=
+
+# slapd normally serves ldap only on all TCP-ports 389. slapd can also
+# service requests on TCP-port 636 (ldaps) and requests via unix
+# sockets.
+# Example usage:
+#SLAPD_SERVICES="ldap://127.0.0.1:389/ ldaps:/// ldapi:///"
+SLAPD_SERVICES="ldaps:/// ldapi:///"
+
+# If SLAPD_NO_START is set, the init script will not start or restart
+# slapd (but stop will still work). Uncomment this if you are
+# starting slapd via some other means or if you don't want slapd normally
+# started at boot.
+#SLAPD_NO_START=1
+
+# If SLAPD_SENTINEL_FILE is set to path to a file and that file exists,
+# the init script will not start or restart slapd (but stop will still
+# work). Use this for temporarily disabling startup of slapd (when doing
+# maintenance, for example, or through a configuration management system)
+# when you don't want to edit a configuration file.
+SLAPD_SENTINEL_FILE=/etc/ldap/noslapd
+
+# For Kerberos authentication (via SASL), slapd by default uses the system
+# keytab file (/etc/krb5.keytab). To use a different keytab file,
+# uncomment this line and change the path.
+#export KRB5_KTNAME=/etc/krb5.keytab
+
+# Additional options to pass to slapd
+SLAPD_OPTIONS=""
+
+
--- /dev/null
+# This is the right place to customize your installation of SpamAssassin.
+#
+# See 'perldoc Mail::SpamAssassin::Conf' for details of what can be
+# tweaked.
+#
+# Only a small subset of options are listed below
+#
+###########################################################################
+
+# Add *****SPAM***** to the Subject header of spam e-mails
+#
+# rewrite_header Subject *****SPAM*****
+rewrite_header Subject
+add_header spam Flag _YESNOCAPS_
+add_header all Status _YESNO_, score=_SCORE_ required_REQD_ tests=_TESTS_ autolearn=_AUTOLEARN_ version=_VERSION_
+
+
+# Save spam messages as a message/rfc822 MIME attachment instead of
+# modifying the original message (0: off, 2: use text/plain instead)
+#
+# report_safe 1
+
+
+# Set which networks or hosts are considered 'trusted' by your mail
+# server (i.e. not spammers)
+#
+# trusted_networks 212.17.35.
+
+
+# Set file-locking method (flock is not safe over NFS, but is faster)
+#
+# lock_method flock
+
+
+# Set the threshold at which a message is considered spam (default: 5.0)
+#
+# required_score 5.0
+
+
+# Use Bayesian classifier (default: 1)
+#
+# use_bayes 1
+
+
+# Bayesian classifier auto-learning (default: 1)
+#
+# bayes_auto_learn 1
+
+
+# Set headers which may provide inappropriate cues to the Bayesian
+# classifier
+#
+# bayes_ignore_header X-Bogosity
+# bayes_ignore_header X-Spam-Flag
+# bayes_ignore_header X-Spam-Status
+
+
+# Some shortcircuiting, if the plugin is enabled
+#
+ifplugin Mail::SpamAssassin::Plugin::Shortcircuit
+#
+# default: strongly-whitelisted mails are *really* whitelisted now, if the
+# shortcircuiting plugin is active, causing early exit to save CPU load.
+# Uncomment to turn this on
+#
+# shortcircuit USER_IN_WHITELIST on
+# shortcircuit USER_IN_DEF_WHITELIST on
+# shortcircuit USER_IN_ALL_SPAM_TO on
+# shortcircuit SUBJECT_IN_WHITELIST on
+
+# the opposite; blacklisted mails can also save CPU
+#
+# shortcircuit USER_IN_BLACKLIST on
+# shortcircuit USER_IN_BLACKLIST_TO on
+# shortcircuit SUBJECT_IN_BLACKLIST on
+
+# if you have taken the time to correctly specify your "trusted_networks",
+# this is another good way to save CPU
+#
+# shortcircuit ALL_TRUSTED on
+
+# and a well-trained bayes DB can save running rules, too
+#
+# shortcircuit BAYES_99 spam
+# shortcircuit BAYES_00 ham
+
+endif # Mail::SpamAssassin::Plugin::Shortcircuit
+
--- /dev/null
+class hgr::dovecot {
+
+ package {
+ "dovecot-imapd":
+ ensure => installed;
+ }
+
+ file {
+ "/etc/dovecot/conf.d/10-mail.conf":
+ ensure => present,
+ source => "puppet:///modules/hgr/dovecot/10-mail.conf",
+ owner => "root",
+ group => "root",
+ mode => "0644",
+ notify => Service["dovecot"],
+ require => [Package["dovecot-imapd"]];
+ "/etc/dovecot/conf.d/10-master.conf":
+ ensure => present,
+ source => "puppet:///modules/hgr/dovecot/10-master.conf",
+ owner => "root",
+ group => "root",
+ mode => "0644",
+ notify => Service["dovecot"],
+ require => [Package["dovecot-imapd"]];
+ "/etc/dovecot/conf.d/10-auth.conf":
+ ensure => present,
+ source => "puppet:///modules/hgr/dovecot/10-auth.conf",
+ owner => "root",
+ group => "root",
+ mode => "0644",
+ notify => Service["dovecot"],
+ require => [Package["dovecot-imapd"]];
+ }
+
+ service {
+ "dovecot":
+ ensure => running,
+ enable => true,
+ require => Package["dovecot-imapd"];
+ }
+
+}
class hgr {
- package {
- "postfix" :
- ensure => installed;
- "dovecot" :
- ensure => installed;
- "sasl2-bin":
- ensure => installed;
-
- "spamassassin":
- ensure => installed;
- "pyzor":
- ensure => installed;
-
- "incron" :
- ensure => installed;
-
- "notmuch" :
- ensure => installeD;
- }
-
- service {
- "postfix":
- ensure => running,
- enable => true,
- require => Package["postfix"];
- "dovecot":
- ensure => running,
- enable => true,
- require => Package["dovecot"];
- "saslauthd"
- ensure => running,
- enable => true,
- require => Package["sasl2-bin"]
- }
-
-# Beter support for pulling a github repo ?
-# support for running 'sudo python setup.py install' to build afew
-
- package {
- "python-dev":
- ensure => installed;
- "gcc" :
- ensure => installed;
- "git":
- ensure => installed;
- }
-
- file {
- "/var/tmp/git":
- ensure => directory;
- }
-
- exec {
- "clone-afew-repo":
- cwd => "/var/tmp/git"
- command => "git clone https://github.com/teythoon/afew /var/tmp/git/afew"
- creates => "/var/tmp/git/afew/setup.py";
- requires => [File["/var/tmp/git"],Package["git"]]
- "install-afew":
- cwd => "/var/tmp/git/afew";
- command => "/usr/bin/python /var/tmp/git/afew/setup.py install",
- creates => "/usr/local/bin/afew",
- requires => [Exec["clone-afew-repo"],Package["python-dev"],Package["gcc"]];
- }
-
- file {
- "/usr/local/bin/afew":
- ensure => present,
- require => Exec["install-afew"];
- "/usr/local/bin/my-notmuch-new.sh":
- ensure => present,
- mode => "0755",
- source => "puppet:///module/hgr/my-notmuch-new.sh",
- require => [Package["notmuch"], File["/usr/local/bin/afew"]];
- }
+ include hgr::postfix
+ include hgr::dovecot
+ include hgr::spamassassin
+ include hgr::radicale
+ include hgr::slapd
}
--- /dev/null
+class hgr::postfix {
+
+ package {
+ "exim4":
+ ensure => absent;
+ "postfix":
+ ensure => installed;
+ "sasl2-bin":
+ ensure => installed;
+ "libsasl2-2":
+ ensure => installed;
+ "libsasl2-modules":
+ ensure => installed;
+ "procmail":
+ ensure => installed;
+ }
+
+ file {
+
+ "/etc/postfix/main.cf":
+ ensure => present,
+ content => template("hgr/postfix/main.cf.erb"),
+ owner => "root",
+ group => "root",
+ mode => "0644",
+ notify => Service["postfix"],
+ require => [Package["postfix"],File["/etc/ssl/certs/${::fqdn}.pem"],File["/etc/ssl/private/${::fqdn}.key"],File["/etc/ssl/certs/${::fqdn}-CA.pem"]];
+
+ "/etc/postfix/master.cf":
+ ensure => present,
+ source => "puppet:///modules/hgr/postfix/master.cf",
+ owner => "root",
+ group => "root",
+ mode => "0644",
+ notify => Service["postfix"],
+ require => [Package["postfix","spamassassin"]];
+ # TODO: need to run portmap on this file after updating it / before restarting postfix
+ "/etc/postfix/send_access":
+ ensure => present,
+ owner => "root",
+ group => "root",
+ mode => "0644",
+ notify => Service["postfix"],
+ require => Package["postfix"];
+ "/etc/procmailrc":
+ ensure => present,
+ source => "puppet:///modules/hgr/procmailrc",
+ owner => "root",
+ group => "root",
+ mode => "0644",
+ require => Package["procmail"];
+ }
+
+ service {
+ "postfix":
+ ensure => running,
+ enable => true,
+ require => Package["postfix"];
+ }
+}
--- /dev/null
+class hgr::radicale {
+
+ $radicale_public_users = hiera('radicale.public_users','public')
+ $radicale_private_users = hiera('radicale.private_users','private')
+
+ package {
+ "radicale":
+ ensure => installed;
+ }
+
+ file {
+ "/etc/radicale/config":
+ ensure => file,
+ content => template("hgr/radicale/config.erb"),
+ owner => "root",
+ group => "root",
+ mode => "0644",
+ require => [Package["radicale"],File["/etc/ssl/certs/${::fqdn}.pem"],File["/etc/ssl/private/${::fqdn}.key"],File["/etc/radicale/users"]];
+ "/etc/radicale/users":
+ ensure => file,
+ mode => "0644",
+ owner => "root",
+ group => "root",
+ require => Package["radicale"];
+ }
+
+ service {
+ "radicale":
+ ensure => running,
+ enable => true,
+ require => [Package["radicale"],File["/etc/radicale/config"]];
+ }
+
+}
--- /dev/null
+class hgr::slapd {
+
+ # first define a admin password for LDAP
+
+ package {
+ "slapd" : ensure => installed;
+ "ldapscripts" : ensure => installed;
+ }
+
+ service {
+ "slapd":
+ ensure => running,
+ enable => true,
+ require => [Package["slapd"],File["/etc/default/slapd"]];
+ }
+
+ file {
+ "/etc/default/slapd":
+ ensure => present,
+ source => "puppet:///modules/hgr/slapd/slapd.default",
+ owner => "root",
+ group => "root",
+ mode => "0644",
+ require => Package["slapd"];
+
+ "/etc/ldap/slapd.d/tls-config.ldif":
+ ensure => present,
+ contents => template("hgr/slapd/tls-config.ldif.erb"),
+ owner => "root",
+ group => "root",
+ mode => "0644",
+ require => Package["slapd"];
+ }
+
+ exec {
+ "tls-config.ldif":
+ command => "/usr/bin/ldapmodify -QY EXTERNAL -H ldapi:/// -f /etc/ldap/slapd.d/tls-config.ldif",
+ unless => "/bin/grep olcTLS 'cn=config.ldif'",
+ logoutput => true,
+ refreshonly => true,
+ subscribe => File["/etc/ldap/slapd.d/tls-config.ldif"],
+ timeout => 5,
+ require => [Service["slapd"],File["/etc/ldap/slapd.d/tls-config.ldif"]];
+ }
+
+ # add openldap to the ssl-cert group
+ # (usermod -a -G ssl-cert openldap)
+ # unless 'groups openldap | grep ssl-cert'
+
+ # Need to ensure /etc/ssl/private is group-readable
+
+ # Need to open 636 on /etc/iptables/rules.v4
+
+
+}
--- /dev/null
+class hgr::spamassassin {
+
+ package {
+ "spamassassin":
+ ensure => installed;
+ "pyzor":
+ ensure => installed;
+ }
+
+ file {
+ "/etc/spamassassin/local.cf":
+ ensure => present,
+ source => "puppet:///modules/hgr/spamassassin/local.cf",
+ owner => "root",
+ group => "root",
+ mode => "0644",
+ notify => Service["spamassassin"],
+ require => Package["spamassassin"];
+ }
+
+ service {
+ "spamassassin":
+ ensure => running,
+ enable => true,
+ require => Package["spamassassin"];
+ }
+
+ exec {
+ "pyzor-discover":
+ command => "/usr/bin/pyzor discover",
+ creates => "/root/.pyzor/servers",
+ user => "root",
+ require => Package["pyzor"];
+ }
+
+
+
+}
--- /dev/null
+# See /usr/share/postfix/main.cf.dist for a commented, more complete version
+
+
+# Debian specific: Specifying a file name will cause the first
+# line of that file to be used as the name. The Debian default
+# is /etc/mailname.
+#myorigin = /etc/mailname
+
+smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
+biff = no
+
+# appending .domain is the MUA's job.
+append_dot_mydomain = no
+
+# Uncomment the next line to generate "delayed mail" warnings
+#delay_warning_time = 4h
+
+readme_directory = no
+
+# TLS parameters
+#smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
+smtpd_tls_cert_file=/etc/ssl/certs/<%= scope.lookupvar('::fqdn') %>.pem
+#smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
+smtpd_tls_key_file=/etc/ssl/private/<%= scope.lookupvar('::fqdn') %>.key
+smtpd_tls_CAfile=/etc/ssl/certs/<%= scope.lookupvar('::fqdn') %>-CA.pem
+smtpd_use_tls=yes
+smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
+smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
+
+# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
+# information on enabling SSL in the smtp client.
+
+#myhostname = localhost
+myhostname = <%= scope.lookupvar('::fqdn') %>
+alias_maps = hash:/etc/aliases,regexp:/etc/postfix/regexp_aliases
+alias_database = hash:/etc/aliases
+myorigin = <%= scope.lookupvar('::fqdn') %>
+mydestination = <%= scope.lookupvar('::fqdn') %>, localhost, localhost.localdomain, localhost
+relayhost =
+mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
+mailbox_size_limit = 0
+recipient_delimiter = +
+inet_interfaces = all
+
+mailbox_command = procmail -a "$EXTENSION"
+home_mailbox = Maildir/
+
+smtpd_sasl_type = dovecot
+smtpd_sasl_path = private/auth
+smtpd_sasl_auth_enable = yes
+smtpd_sasl_security_options = noanonymous
+smtpd_sasl_local_domain = $myhostname
+broken_sasl_auth_clients = yes
+
+smtpd_sender_restrictions = permit_sasl_authenticated, permit_mynetworks,
+#smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination,
+# reject_unknown_sender_domain,reject
+
+smtpd_recipient_restrictions = reject_unauth_pipelining,
+ permit_sasl_authenticated,
+ permit_mynetworks,
+ reject_non_fqdn_recipient,
+ reject_unknown_recipient_domain,
+ reject_unauth_destination,
+ reject_rbl_client sbl-xbl.spamhaus.org,
+ check_sender_access hash:/etc/postfix/sender_access
+relay_domains = <%= scope.lookupvar('::fqdn') %>
--- /dev/null
+# -*- mode: conf -*-
+# vim:ft=cfg
+
+# Config file for Radicale - A simple calendar server
+#
+# Place it into /etc/radicale/config (global)
+# or ~/.config/radicale/config (user)
+#
+# The commented out values are the defaults.
+
+
+[server]
+# CalDAV server hostnames separated by a comma
+# IPv4 syntax: address:port
+# IPv6 syntax: [address]:port
+# IPv6 adresses are configured to only allow IPv6 connections
+#hosts = 0.0.0.0:5232
+# Daemon flag
+#daemon = False
+# File storing the PID in daemon mode
+#pid =
+# SSL flag, enable HTTPS protocol
+#ssl = False
+# SSL certificate path
+certificate = /etc/ssl/certs/<%= scope.lookupvar('::fqdn') %>.pem
+# SSL private key
+key = /etc/ssl/private/<%= scope.lookupvar('::fqdn') %>.key
+# Reverse DNS to resolve client address in logs
+#dns_lookup = True
+
+
+[encoding]
+# Encoding for responding requests
+#request = utf-8
+# Encoding for storing local collections
+#stock = utf-8
+
+[acl]
+# Access method
+# Value: None | htpasswd | LDAP | PAM | courier
+type = htpasswd
+
+# Usernames used for public collections, separated by a comma
+public_users = <%= radicale_public_users %>
+# Usernames used for private collections, separated by a comma
+private_users = <%= radicale_private_users %>
+
+# Htpasswd filename
+htpasswd_filename = /etc/radicale/users
+# Htpasswd encryption method
+# Value: plain | sha1 | crypt
+htpasswd_encryption = crypt
+
+# LDAP server URL, with protocol and port
+#ldap_url = ldap://localhost:389/
+# LDAP base path
+#ldap_base = ou=users,dc=example,dC=COm
+# LDAP login attribute
+#ldap_attribute = uid
+# LDAP filter string
+# placed as X in a query of the form (&(...)X)
+# example: (objectCategory=Person)(objectClass=User)(memberOf=cn=calenderusers,ou=users,dc=example,dc=org)
+# leave empty if no additional filter is needed
+#ldap_filter =
+# LDAP dn for initial login, used if LDAP server does not allow anonymous searches
+# Leave empty if searches are anonymous
+#ldap_binddn =
+# LDAP password for initial login, used with ldap_binddn
+#ldap_password =
+# LDAP scope of the search
+#ldap_scope = OneLevel
+
+# PAM group user should be member of
+#pam_group_membership =
+
+# Path to the Courier Authdaemon socket
+#courier_socket =
+
+[storage]
+# Storage backend
+#type = filesystem
+
+# Folder for storing local collections, created if not present
+filesystem_folder = /var/lib/radicale/collections
+
+
+[logging]
+# Logging configuration file
+# If no config is given, simple information is printed on the standard output
+# For more information about the syntax of the configuration file, see:
+# http://docs.python.org/library/logging.config.html
+#config = /etc/radicale/logging
+# Set the default logging level to debug
+#debug = False
+# Store all environment variables (including those set in the shell)
+#full_environment = False
+
--- /dev/null
+dn: cn=config
+add: olcTLSCACertificateFile
+olcTLSCACertificateFile: /etc/ssl/certs/<%= scope.lookupvar('::fqdn') %>-CA.pem
+-
+add: olcTLSCertificateFile
+olcTLSCertificateFile: /etc/ssl/certs/<%= scope.lookupvar('::fqdn') %>.pem
+-
+add: olcTLSCertificateKeyFile
+olcTLSCertificateKeyFile: /etc/ssl/private/<%= scope.lookupvar('::fqdn') %>.key
projects / hgr.git / commitdiff